Creek Evolution 2 Amplifier
;)
Creek have updated the popular Evolution amplifier. In addition to a careful reworking of the design to remove all unnecessary processing from the signal path a new AV input has been added to allow the Evolution two to amplify the front two channels of a 5.1 set-up.
Technical Specifications
| Power in to 8 Ohm both channel driven | 80 Watts |
| Power in to 4 Ohm one channel driven | 145 Watts |
| Max Current | > 10 Amps |
| THD | < 0.05% 20Hz - 20Khz |
| Frequency Response | 5Hz - 50KHz - 1dB |
| Slew Rate | > 25 V per µS |
| Gain | x52 |
| Input Sensitivity | 480mV |
| Separation | > 60dB |
| Signal to Noise | > 90dB |
| MM Phono Sensitivity & Impedance | 3.5mV 47k Ohm (when fitted) |
| MC Phono Sensitivity & Impedance | 0.75mV 1k Ohm (when fitted) |
| Outputs | 2 |
| Headphone output | Yes |
| A/B speaker switch | No |
| Voltage | Switchable 115V/230V |
| Consumption (at idle) | 40 Watts |
| Consumption (at full power) | 340 Watts |
| Weight | 8.6Kgs 19lbs |
| Size W/H/D | 430 x 80 x 340mm 17 x 3.2 x 15.5ins |